Overview
The Feasa ICT LED Analyser is a multichannel LED test tool designed specifically for integration with in-circuit test (ICT) platforms. It measures LED colour and intensity simultaneously across multiple channels in a single test cycle, using individual optical fibre probes — one per LED under test.
Unlike the Functional Analyser, the ICT model communicates via RS232 and a 20-pin addressable port, supporting both Frequency Out and Synchronous Serial output modes. An External Trigger Input allows measurements to be synchronised with an external event such as an LED switching on — essential for ICT environments where timing precision matters.
The ICT Analyser ships with test models for Agilent i3070 and Genrad/Teradyne ICT platforms, plus a full DLL and LabVIEW/C++ programming library for custom integration. It is capable of testing 100 LEDs in less than 3 seconds and supports daisy chaining of up to 30 units via a single RS232 port.
Built for in-circuit test. Trusted globally.
ICT platform integration
Supplied with test models for Agilent i3070 and Genrad/Teradyne ICT platforms. Slots directly into your existing bed-of-nails fixture and test station without additional infrastructure.
External trigger and 20-pin port
The 20-pin addressable port supports Frequency Out and Synchronous Serial modes. The External Trigger Input synchronises LED capture with an external event — ideal for timed or sequenced ICT test programs.
Fast parallel capture
Up to 20 LEDs captured in parallel in as little as 3ms (ultra-high brightness). 100 LEDs testable in under 3 seconds. Read back per fibre is approximately 5ms — total test time scales linearly with channel count.
40+ years expertise
Engineering LED test solutions since the early 2000s, headquartered in Limerick, Ireland.
Millions of LEDs daily
Tested every day worldwide via Feasa systems across automotive, medical and electronics production lines.
ISO 9001 certified
Full in-house design, development and manufacturing. Deployed in 30+ countries worldwide.
Applications
Where our ICT LED Analyser is commonly used.
Automotive
Exterior and Interior Lighting
Indicator LEDs
RJ45, Panels and Signal Indicators
Interior & Avionics
Dashboard and Avionics Lighting
LCD Backlighting
TV, Notebook and Phone Displays
Technical Specifications
| 参数 | 数值 | 备注 |
|---|---|---|
| Channels | 3, 5, 6, 10, 20 | Simultaneous measurement |
| Wavelength range | 450–650 nm | Visible spectrum |
| Dominant wavelength accuracy | ±2 nm @ 590 nm | |
| CCT accuracy | ±200K @ 2856K | Color temperature |
| CIE xy accuracy | ±0.01 @ x=0.33, y=0.33 | With OH3 optical head |
| Resolution | 0.0001 chromaticity | |
| Repeatability (DW) | ±1 nm | Excellent consistency |
| Repeatability (CCT) | ±50K @ 2856K | Lab-grade stability |
| Repeatability (CIE xy) | ±0.0015 | Precision measurement |
| Supply voltage | 5.0V | External PSU required for RS232 |
| Supply current | 220 mA | Low power consumption |
| Dimensions (3–10 ch) | 100 × 29 × 29 mm | ICT model |
| Dimensions (20 ch) | 140 × 29 × 29 mm | ICT model |
| Fiber length | 0.6 m | Per channel |
| Fiber diameter | 1.00 mm incl. cladding | Plastic optical fibre |
| Min. bend radius | 15 mm | |
| Operating temperature | 0–50°C | Industrial range |
| Interface | RS232, 20-pin addressable port | No USB on ICT model |
| Baud rate (RS232) | Up to 115,200 baud | External PSU required |
| 20-pin port modes | Frequency Out, Synchronous Serial | ICT platform integration |
| External trigger | Yes | Synchronise with external event |
| Daisy chain | No | ICT model — use RS232 |
| Capture time (Ultra High) | 3 ms | C5 range — per 20-LED cycle |
| ICT read back (Agilent i3070) | 400–700 ms | Frequency-dependent |
| Output formats (RS232) | RGB, HSI, Dom. WL, CCT, CIE xy, CIE u'v' | |
| Output formats (Sync. Serial) | RGBI, HSI, CCT, CIE xy, WSI, Absolute Intensity | |
| Compliance | CE, RoHS | EU standards |
| Model numbers | 3I · 5I · 6I · 10I · 20I | Channel variants |
Feasa Software Suite
Software and ICT drivers included with every analyser
- Agilent i3070 test models — Ready-to-deploy test models for the Agilent i3070 ICT platform
- Teradyne / Genrad test code — Test code for Teradyne and Genrad ICT platforms
- DLL — For custom testing integration
- Programming examples — LabVIEW and C++ examples included
- Feasa Terminal — Direct command-line control and diagnostics
- Feasa User Software — Setup, calibration and pass/fail configuration
Downloads and Resources
Product Datasheet
Product Flyer
Mechanical Drawing